The industrial heater is an electric heating product that needs to be fixed on the wall or roof. It is suitable for use in factories, garages, shops, drying rooms and other places. The fan works to force air circulation, which is beneficial to air heating and temperature balance, and is suitable for use in places with intermittent heating.
The heater is a combined unit composed of a ventilator, a motor and a radiator. It is suitable for various types of workshops where the air is allowed to be recirculated. When the air does not contain dust or flammable gases, it can be used for circulating air heating.
The air heater is mainly composed of an air heater and a fan. The air heater dissipates heat, and then the fan sends it out to adjust the indoor air temperature. The air heater consists of spiral finned tubes. For example, the heat dissipation exhaust pipe of a steam-type heater is wrapped around a seamless boiler tube with a wall thickness of Φ21.5 using special equipment with aluminum strips, and the distance between the sheets is 2.5mm. The exhaust pipe and the heat medium circulation pipe are an integral welded structure. The working pressure is below 0.8MPa.
Features:
1. The original microcomputer digital control temperature display can accurately set the target temperature, accurate to 1 degree. It also displays the current ambient temperature in real time for easy heater control.
2. Temperature is continuously adjustable
3. Built-in automatic overheating protection, manual restart device
4. Unique heating start-up and automatic cooling shutdown devices. The electric heating tube automatically starts the fan after it is preheated to a certain temperature to ensure that warm air is available immediately; after stopping heating, the fan automatically runs for a period of time to ensure that the whole machine automatically stops after cooling to a suitable temperature, which enhances the safety and operation efficiency of the equipment. Convenience
5. With H07RN-F 2m cable and European explosion-proof plug
6. Use high-quality components and materials to ensure product quality
a) The internal wires are made of high-temperature resistant silicone wire to extend the service life.
b) Use imported connectors to ensure the reliability and safety of electrical connections
c) The electric heating tube is made of 304 stainless steel, and the internal filler is made of imported high-temperature crystallized magnesium powder to ensure the stability of heating and extend the life of the heating components.
7. Reasonable and beautiful structural design
l The bracket is stable and beautiful, and comes with a wall hook, making it easy to place, hang and carry.
l The rear anti-bird mesh design effectively increases the air intake efficiency, is more conducive to motor heat dissipation, and saves corresponding space.
Scope of application
Factory workshops, material warehouses, moisture-proof drying, local heating
Construction sites, roads and bridges, cement maintenance, outdoor heating
Oil drilling, coal mining areas, de-icing and anti-freezing, equipment insulation
Railway airports, yachts and ships, paint drying, construction insulation
Military vehicle equipment, command tent, mobile heating, convenient heating
Greenhouses, venues and clubs, clean thermal energy, rapid heating
Connected structure, the working pressure of the heater is below 0.8MPa.
Safety instructions for use
Industrial heaters cannot be placed too close to shower rooms, bathrooms, swimming pools, etc.
Do not cover industrial heaters.
Make sure the industrial heater is kept away from flammable and explosive materials, and do not place it directly near a wall power socket.
If the heater is placed in a wet place such as a shower room or bathroom, care must be taken to place it out of reach of people.
It should be placed in a place out of reach of children.
Hot News
Upholding the philosophy of quality-oriented development and customer-centric service, DECENT MACHINERY continues to expand its global mining equipment market footprint. Recently, the company has achieved in-depth and repeated cooperation with a high-standard mining client in Southeast Asia, relying on reliable product quality, rigorous safety standards and transparent full-cycle service, further ...
DECENT MACHINERY continues to deliver robust custom‑tailored tunnel ventilation solutions for a flagship underground gold mining operation across Central Asia, addressing extreme underground operational challenges within complex deep‑mine environments. The region’s premier underground gold mine has long grappled with persistent operational bottlenecks stemming from narrow underground drifts, kilom...
Recently, DECENT MACHINERY’s overseas business team held an in-depth face-to-face business meeting and friendly dinner negotiation with long-term European clients in Shanghai. Both parties reviewed the whole progress of project communication, confirmed the official cooperation order, and conducted in-depth discussions on future multi-dimensional strategic cooperation. The project cooperation bet...
We are delighted to announce that Decent Machinery has won a new contract for multistage centrifugal fans. This equipment will be deployed in a major China‑aided landmark project in Southeast Asia. The end customer is a global leading manufacturer of power semiconductors. The multistage centrifugal fans are designed for the factory’s wastewater treatment system, serving as core aeration equipmen...
